534005 Chrylser Center Riser for use with 3" I.D. exhaust hose/3/4" N.P.T. cooling hose connection. It fits Chrysler center riser manifold p/n CM-1-4417063.
1-0007 Manifold rear end adapter for Chrylser 6-Cylinder manifold C6-1-M47.
76.00
1-0067 Exhaust end plate. For use with 2quot; NPT thread pipe.
79.00
20-0031
90° exhaust elbow connector with internal water discharge. Accepts 2.5" or 3" i.d. exhaust hose. Swivels. Requires mounting kit 20-0002P. It works with Chrysler Crown & Ace manifold p/n C6-1-M47.
179.00
20-0034 3" exhaust hose connector. It fits high riser 20-0039.
90.00
20-0035 2.5" exhaust hose connector. It fits high riser 20-0039.
89.00
20-0055 30° exhaust elbow connector, fully jacketed. Accepts 2.5" or 3" i.d. exhaust hose. Swivles. Requires 20-0002PKG. It fits Chrysler Crown & Ace 6-Cylinder Engine Manifold.
198.00
534002 Adaptor kit (sold as shown) to fit the�original Chrysler center riser exhaust�manifold to the Barr style riser (part�#534005). Adaptor must be used for�CM 1 4417063�Barr style riser.
65.36
CM-1-5972-B Front end plate.
69.00
CM-1-6672-B Front end plate without the water connector.
52.00
CM-1-6672-H Front end plate with 0.5" NPT pipe thread.
62.00
CM-20-1947617 Exhaust to elbow extension retainer.
13.00
CM-20-4142411-P Mounting kit for exhaust manifold riser upper elbow (includes sleeve, O-rings, clamps and bolts and pipe plugs).
57.00
CM-20-6672 3" exhaust elbow connector, 20° down angle. For inboard application. Can be used with riser CM-20-6674 (with mounting kit).
184.00
AP 5704 OSCO 794 Chrysler P/N: 3527794
CM-20-9224 Exhaust to elbow extension seal retainer sleeve.